FLORABEST 285178, Перевод оригинальной инструкции

Страница: 21 / 92

2 1
C Y NI IE G B
Allow the machine to cool
down before all maintenance
and cleaning works. Danger
of burn injuries!
Cleaning
• Clean the machine thoroughly after eve-
ry use. In this way, you extend the life of
the machine and avoid accidents.
• Keep the gripping handles free of petrol,
oil or grease. Clean the gripping han-
dles, where appropriate, with a moist
cloth soaked in soap. Use no solvents or
petrol for cleaning!
• Clean the saw chain after every use. Use
a paint brush or wipe for that. Do not use
any liquids to clean the chain. After clean-
ing, oil the chain lightly with chain oil.
• When cleaning, also remove the chain
wheel cover (
A
15) so that this area can
be cleaned as well.
• Clean the chain bar (Guide) (
A
4).
• Clean the ventilation slots and the sur-
faces of the machine with a paint brush,
whisk or dry cloth. Do not use any liq-
uids for cleaning.
• Clean the oil passages of the chain bar
( 27), in order to guarantee a trouble-
free, automatic oiling of the saw chain
during operation.
Maintenance intervals
Regularly carry out the maintenance opera-
tions listed in the following table. The life
of the saw is extended by regular main-
tenance of your chainsaw. Furthermore,
you get optimum cutting performance and
avoid accidents.
Maintenance Interval Table
Machine part Action
Before
every
use
After 10
hours of
operation
After
every
use
Components of the chain brake Check, replace if required

Sprocket chain wheel ( 25) Check, replace if required

Saw chain (
A
5)
Check oil, regrind or re-
place if required

Saw chain (
A
5) Clean and oil

Guide bar (
A
4) Check, clean and oil
 
Guide bar (
A
4) turn around

Oil automatic system
check and, where appropriate,
clean oil outflow duct
