FLORABEST 285176, Перевод оригинальной инструкции, Страница: 7 / 64

7
CY
NI
IE GB
Technical Data
Long-Reach Hedge Trimmer ..... FHL 900 E5
Input voltage rating ...230-240 V~, 50 Hz
Input power ................................900 W
Safety class .................................... II
Degree of protection ........................ IPX0
Weight (incl. accessories) ..approx. 6.2 kg
Cutting length ........................... 410 mm
Cutting capacity .......................... 20 mm
Acoustic pressure level
(L
pA
) ..................84.5 dB(A); K
pA
= 3 dB
Sound power level (L
WA
)
measured ......... 95.6 dB(A); K
WA
= 3 dB
guaranteed .......................... 99 dB(A)
Vibration (a
h
) at
at the handle .....................2.083 m/s
2
at the round handle ............3.132 m/s
2
....................................... K=1.5 m/s
2
Noise and vibration values have been
determined according to the standards and
regulations mentioned in the declaration of
conformity.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission value
may differ during actual use of the power
tool from the stated value depending on the
manner in which the power tool is used.
Safety precautions aimed at protecting the
user should be based on estimated expo-
sure under actual usage conditions (all parts
of the operating cycle are to be considered,
including, for example, times during which
the power tool is turned off and times when
the tool is turned on but is running idle).
Notes on Safety
This section deals with the basic safety
regulations to be observed when working
with the electric hedge trimmer.
Symbols in the manual
Warning symbols with in-
formation on damage and
injury prevention.
Hazard symbol with infor-
mation on the prevention of
personal injury caused by
electric shock.
Instruction symbols with information
on preventing damage.
Always remove the mains plug be-
fore working on the appliance.
Help symbols with information on
improving tool handling.
Symbols on the Equipment
Caution!
Read through the instruction manual
carefully.
Wear personal protective equip-
ment. Basically, wear protective
goggles or, even better, face protec-
tion, ear protection, safety helmet,
cut-protection working clothes.
Wear cut-resistant gloves.
Wear anti-slip safety shoes.