Flora Digital Printing System
Model LJ320P
Copyright 2011@ Shenzhen Runtianzhi Image Technology Co.,Ltd. By Victor Xu
~ 54 ~
Chapter 6 Operation Manual of Flora LJ3208P
6.1 Brief Introduction
This chapter introduces the details of operating the operating instructions of the machine from starting
up to shutdown procedure.
Before start on the machine, the operator must read this chapter carefully.
6.2 Starting-up Activities
It is highly recommended to do housekeeping before starting to operate the machine. Maintaining
good housekeeping helps improve the quality of the output as well as the safety of operator. Below is the
check list of activities that operator should do prior to operation of the machine.
z
Turn on the ventilating and lighting system inside the printing room.
z
Check and clear for any traces of ink spillage on the machine and the floor.
z
Check if the Waste Ink Bottle is already full and replace if necessary
z
Check if there is enough ink for printing and flush solution for cleaning the print head.
z
Check and ensure that the printing platform along the print head carriage path is free from
loose parts or obstructing object
z
Turn on the Main Power Switch and power-on the PC.
z
Turn on the Printer Power
z
Check the Negative Pressure setting
z
Perform Ink Priming procedure on the Print head
6.3 Print head Jetting Check
Check the jetting status of each Print head periodically before, during and after using the machine.
The ideal prints should as below:
Note:
Please take note that all print heads must print the same. If not, do purge or flush the print heads.
6.4 Operational Approach of PhotoPRINT Server Flora Edition 6.1v2
6.4.1 Job Folder
Figure below shows the current job list and statuses, the printer model, add job icon
and other printing instructions. It is divided into three queues:
Click this to send test
print head
Select Test Print Head
Fig.6.3-1 Send Test Print
