8
User Manual 160 DualArc ENG
FLOW160DA025
ASSEMBLY AND INSTALLATION
Carefully unpack the product and verify that all the parts and accessories identified earlier are present in the machine and do not appear to have been broken during transportation. If a missing or defective part is
found, please contact your retailer to obtain a replacement.
The 160 DualArc welding machine comes
without
a power plug. A qualified electrician must install on the machine a NEMA rated plug of at least 80A
with proper grounding. The welding machine should be used in a
dedicated circuit with a slow blow fuse or a circuit breaker rated at 90A.
Extension cords are not recommended for this machine. Do not run other appliances, lights or tools on the same circuit as the one for the welder when using it, as this may compromise your safety and negatively affect
the quality of the weld.
Assemble the face shield provided with this unit following the instructions below.
Fasten the handle of the unit with a screw and screw driver as illustrated below.
