13
User Manual 160 DualArc ENG
FLOW160DA025
BASIC CARE
Always unplug the welder when it is not being used.
Worn parts or damaged parts (cables, switches, plugs, handle) should be replaced promptly (see Parts List).
When the welder is used outdoors, it should be kept from rain or long exposure to the sun.
Inspect the welding cables from time to time to ensure that they are in good condition.
If the welder is not in use for a long time, it should be kept dry and have good ventilation to free it from moisture, corrosive agents etc.
The welder should be kept at temperatures ranging from -25°C (-13°F) to +55°C (131°F), and at relative humidity of no more than 90% (measured at 25°C) when stored and not in use. While being utilized, the welder
should be kept between -10°C and +40°C.
Do not allow any external objects to intrude into the welder case through its vents.
Make sure the unit is not dropped, shaken or otherwise damaged physically.
At least once a year, remove any accumulated dust and check the machine’s external fasteners to make sure there are no loose connections.
If you need to open the case for an inspection of the internal
components, you must make sure the unit is not plugged into an electrical circuit.
The welder must be serviced /repaired only by a qualified technician.
