background image

 

Page 4 / 24 

SATELLITE 760 Generation3

 

 

1800 356 673  

Floorex Products

 

Safety instructions 

Do not modify machine in any way. Only use genuine SATELLITE parts and accessories. 

Repairs should be performed by qualified persons only. 

Ensure parts have stopped moving and disconnect power or spark plug when servicing or changing blades or 

accessories. 

Never operate machine in rain or if heavy moisture is present. 

Petrol is extremely flammable and poisonous. Petrol should only be dispensed in well ventilated areas, and 

only when engine is cool. 

WARNING!  POISONOUS EXHAUST GASES.  Do not operate petrol powered equipment, including generators, 

without adequate ventilation. Carbon monoxide is and invisible odourless gas that can harm or can kill. 

Do not operate SATELLITE 760-6 with any covers or doors removed or open. 

The SATELLITE 760-6 can produce sound pressure levels greater than 85db. The operator must wear 

approved safety ear protection. 

Do not allow the supply cord to come in contact with the cutting blade/head or other moving parts of this 

machine. 

 

 

Содержание Satellite 760-6 Generation3

























Отзывы: