Flomec QSI Series, Руководство по установке

Страница: 7 / 20

7
NOTE: The module was packaged
with the coil pickup in the unseated
position to prevent coil damage
during shipping. The coil has a foam
spacer attached. Remove the liner
from the foam spacer, exposing the
adhesive layer, and seat the coil/
spacer combination in its recess on
the adapter (see Figure 4).
Figure 4
(6) SCREWS, #8-16 X 3/4
COVER PLATE
(QSB OR QSI W/DISPLAY) (SHOWN)
(QSB)
(NO DISPLAY)
(DISPLAY READY)
SEAL
BASE
(4) SCREWS
(#4-40 X 7/8 FOR METALLIC METERS)
(#4-20 X 7/8 PLASTITE FOR PVDF METERS)
GASKET
SCREW TERMINAL
PICK-UP CIRCUIT
BOARD
(4) STRAIN RELIEF
STRAIN RELIEFS SHOWN INSTALLED
FOAM SPACER
(UNDER COIL)
PICK-UP COIL
(2) WIRES THAT
CONNECTS
TO SCREW
TERMINAL