5
Figure 4
Figure 3
A
CONNECT WIRE TO RING TERMINAL.
TIGHTEN RING TERMINAL WITH SCREW.
(3 PLACES)
EARTH GROUND
SIDE VIEW WITH CUT-AWAY
DETAIL A CUT-AWAY VIEW
(TYPICAL 2 PLACES)
SCREW (HAND TIGHT)
RING TERMINAL
GROUNDING PROBE
(APPLY THREAD TAPE
OR PIPE SEALANT
PRIOR TO INSTALL)
1/8 - 27 NPT
(TO BE TAPPED
INTO PORT CAVITY)
Ø.312 (5/16) HOLE
(TO BE DRILLED THRU
FLOOR OF PORT CAVITY)
14-16 AWG
GROUNDING WIRE
QSE GROUNDING - THREADED FITTINGS & ANSI FLANGE
ALL PROCESS PIPE MATERIALS
USING GPI GROUNDING PROBES (Kit P/N 145630-529)
QSE GROUNDING - THREADED FITTINGS
NON-CONDUCTIVE (PLASTIC) PIPE
USING COMMERCIALLY AVAILABLE METAL COUPLINGS
QSE GROUNDING - ANSI FLANGE
NON-CONDUCTIVE (PLASTIC) PIPE
USING COMMERCIALLY AVAILABLE GROUNDING RINGS
EARTH GROUND
14-16 AWG
GROUNDING WIRE
CONDUCTIVE PIPE COUPLING
(STEEL, IRON, BRASS,ALUMINUM, COPPER, ETC.)
(2 PLACES)
HOSE CLAMP
(2 PLACES)
QSE GROUNDING - ANSI FLANGE
CONDUCTIVE METAL PIPE
USING INTEGRATED CONTINUITY GROUND WIRE
METER FLANGE (TYP)
GASKET (TYP)
GASKET (TYP)
GROUNDING RING (TYP)
(COMMERCIALLY AVAILABLE)
EARTH GROUND
CONNECT WIRE TO RING TERMINAL.
TIGHTEN RING TERMINAL WITH SCREW.
14-16 AWG
GROUNDING WIRE
INSERT WIRE UNDER HOSE
CLAMP AND TIGHTEN CLAMP.
(2 PLACES)
CONNECT WIRE TO RING TERMINAL.
TIGHTEN RING TERMINAL WITH SCREW.
EARTH GROUND
GROUNDING SCREW (TYP)
CONNECT WIRE TO RING TERMINAL.
TIGHTEN RING TERMINAL WITH SCREW.
METER FLANGE (TYP)
GASKET (TYP)
14-16 AWG
GROUNDING WIRE
14-16 AWG GROUNDING WIRE TO
MAINTAIN GROUNDING CONTINUITY
BETWEEN PIPE SEGMENTS.
PLASTIC PIPE & FLANGE (TYP)
METAL PIPE & FLANGE (TYP)
GROUNDING SCREW (TYP)
QSE GROUNDING LUG
QSE GROUNDING LUG
QSE GROUNDING
LUG
QSE GROUNDING LUG
A
CONNECT WIRE TO RING TERMINAL.
TIGHTEN RING TERMINAL WITH SCREW.
(3 PLACES)
EARTH GROUND
SIDE VIEW WITH CUT-AWAY
DETAIL A CUT-AWAY VIEW
(TYPICAL 2 PLACES)
SCREW (HAND TIGHT)
RING TERMINAL
GROUNDING PROBE
(APPLY THREAD TAPE
OR PIPE SEALANT
PRIOR TO INSTALL)
1/8 - 27 NPT
(TO BE TAPPED
INTO PORT CAVITY)
Ø.312 (5/16) HOLE
(TO BE DRILLED THRU
FLOOR OF PORT CAVITY)
14-16 AWG
GROUNDING WIRE
QSE GROUNDING - THREADED FITTINGS & ANSI FLANGE
ALL PROCESS PIPE MATERIALS
USING GPI GROUNDING PROBES (Kit P/N 145630-529)
QSE GROUNDING - THREADED FITTINGS
NON-CONDUCTIVE (PLASTIC) PIPE
USING COMMERCIALLY AVAILABLE METAL COUPLINGS
QSE GROUNDING - ANSI FLANGE
NON-CONDUCTIVE (PLASTIC) PIPE
USING COMMERCIALLY AVAILABLE GROUNDING RINGS
EARTH GROUND
14-16 AWG
GROUNDING WIRE
CONDUCTIVE PIPE COUPLING
(STEEL, IRON, BRASS,ALUMINUM, COPPER, ETC.)
(2 PLACES)
HOSE CLAMP
(2 PLACES)
QSE GROUNDING - ANSI FLANGE
CONDUCTIVE METAL PIPE
USING INTEGRATED CONTINUITY GROUND WIRE
METER FLANGE (TYP)
GASKET (TYP)
GASKET (TYP)
GROUNDING RING (TYP)
(COMMERCIALLY AVAILABLE)
EARTH GROUND
CONNECT WIRE TO RING TERMINAL.
TIGHTEN RING TERMINAL WITH SCREW.
14-16 AWG
GROUNDING WIRE
INSERT WIRE UNDER HOSE
CLAMP AND TIGHTEN CLAMP.
(2 PLACES)
CONNECT WIRE TO RING TERMINAL.
TIGHTEN RING TERMINAL WITH SCREW.
EARTH GROUND
GROUNDING SCREW (TYP)
CONNECT WIRE TO RING TERMINAL.
TIGHTEN RING TERMINAL WITH SCREW.
METER FLANGE (TYP)
GASKET (TYP)
14-16 AWG
GROUNDING WIRE
14-16 AWG GROUNDING WIRE TO
MAINTAIN GROUNDING CONTINUITY
BETWEEN PIPE SEGMENTS.
PLASTIC PIPE & FLANGE (TYP)
METAL PIPE & FLANGE (TYP)
GROUNDING SCREW (TYP)
QSE GROUNDING LUG
QSE GROUNDING LUG
QSE GROUNDING
LUG
QSE GROUNDING LUG
