70113Rev1
Mechanical Trouble
Valve will not operate 1) Try moving the valve with the Manual Handwheel after
Pulling the declutch lever.
2) Watch mechanical position On top of actuator for movement
3) If Handwheel will not move, the valve is stuck. Valve needs to
disassembled and repaired.
4) If Handwheel moves well without interruption, check the
adapter connecting the valve and actuator.
5) If Handwheel moves check electrical functioning.
Electrical Trouble
1)
Check Main Power Supply, relays, fuses, lamps, switches
Check Main 2) If the problem is the control panel- replace defective parts.
Control Panel 1
st
If NO Control Panel problem Check Actuator
Then Actuator 3) Check the Actuator Motor and replace if necessary.
4) Torq Switch Tripping- turn main power off and follow
Mechanical Trouble Shooting procedure
5) Check for faulty Limit switch with circuit check,
adjust or replace.
6) All other electrical problems can be resolved by parts
Replacement.
FCEL Actuators are designed for long life under normal operating conditions. It is
Recommended to make an operational check 2X’s per year.
Flomatic warrants all products to be free of defects in workmanship and materials for 1 Year
from date of shipment.
15 Pruyn's Island Drive Glens Falls, New York 12801
Phone (800) 833-2040
www.flomatic.com
Fax (518) 761-9798
