INTRODUCING THE PATCH XT CABLE HANGER
17
INTRODUCING THE XTH CABLE HANGER
PATCH
XT
MANUAL
RACK HANGER
(X2)
This is where the XTH Cable Hanger
is mounted to the rear of PATCH XT.
CROSSBAR HANGERS
(X2)
DB25 cables will rest on these crossbars
when they are connected to PATCH XT,
relieving stress from the cables and the
internal circuit boards inside the unit.
CABLE SECUREMENT HOLES
Holes have been added in XTH's Crossbars
so the user can secure their applicable
cables to the crossbars with cable ties.
(Cable Ties Not Included)
The
XTH Cable Hanger
is an
optional accessory
exclusively for the PATCHXT Model.
The XTH Cable Hanger ships as a 4 piece
kit and assembles in minutes to mount securely to the rear panel of the PATCHXT chassis with 4 Included Fastener’s & Hex Key.
The XTH Cable Hanger creates a strain relief benefit on the PATCHXT Chassis when all 24 DB-25/D-SUB Cables are connected
to the rear panel of the system. DB-25/D-SUB Cables can vary in weight from manufacturer to manufacturer, and when
combined with upwards to 24 cables can create a significant amount of weight on the PATCHXT Chassis’s rear panel.
The XTH Cable Hanger distributes the cable weight of the DB-25/D-SUB Cables evenly causing less stress on the mating
connections on the rear panel of the PATCHXT Model.
XTH CABLE HANGER
ASSEMBLY INSTRUCTIONS ON PAGE 18
