4. IF YOU WISH TO ADD THE COOLER/HUMIDIFIER FUNC-
TION, PRESS THE COOLER/HUMIDIFIER BUTTON.
NOTE: THE ECO AIR COOLER IS EQUIPPED WITH A FLOAT SWITCH. IF THERE
IS NOT ENOUGH WATER IN THE WATER TANK, THE UNIT WILL EMIT A WARN-
ING SOUND AND THE COOLER/HUMIDIFIER FUNCTION WILL AUTOMATICALLY
SHUT OFF.
TROUBLESHOOTING TIP
If the Cooler/Humidifier function automatically shuts off even though there
is enough water in the tank, the float switch that protects the water pump
is stuck. When the float switch is stuck, the unit acts as if there is no water in
the tank. In order to dislodge the float switch, please drain the unit of wa-
ter and ensure that it is dry. Grab the handles on the sides of the unit and
shake the unit from side to side and up and down vigorously. This will reset
the float switch and the Cooler/Humidifier function will work properly.
5. NOW THAT THE UNIT IS ON, THE TIMER, SWING, MODE,
OR -ION FUNCTIONS CAN NOW BE ACTIVATED AND SET
BY SELECTING THEIR BUTTONS.
6. ANYTIME WHEN YOU WANT TO STOP THE UNIT, PRESS
THE OFF BUTTON.
7. REMOTE CONTROL
A. The unit can also be controlled directly with the remote control. Open the
battery cover on the bottom of the remote control and install a 3V CR2032 bat-
tery (see Figure 3).
B. There are 7 keys on the remote control, they function the same as the button
controls on the control panel.
When using remote control, it should be aimed at the Control Panel of the unit.
The remote is effective up to a distance of 6 meters.
*
