8. USING THE ICE PACkS
The unit comes with two ice packs to be used for cooling the water in the water
tank (see Figure 1). This allows the water in the water tank to stay cooler for lon-
ger periods of time so that the evaporative process can work at its optimal.
CLEANING
DUST FILTER
Disconnect power. Pull out the Dust Filter upwards using the handle. Wash the
net with a gentle detergent and a soft brush. If the environment is dirty, you
should wash it once every one or two months.
COOLING PAD
Disconnect power. Remove the Dust Filter and then push inwards on the tabs at
the top of the Cooling Pad Frame to loosen the Cooling Pad Frame. Then, pull it
outwards to remove. To wash the Cooling Pad, run cold water through it while
it is in the Cooling Pad Frame.
WATER TANk
Disconnect power and then drain the water from the water tank by removing
the drain plug at the back of the tank.
DO NOT TIP UNIT OVER TO DRAIN WA-
TER.
Unlock the water tank and pull it out as far as possible and then use a brush
or a cloth to clean any sediments in the water tank with a gentle detergent.
1. Cooling Pad
2. Cooling Pad Frame
3. Tabs
4. Dust Filter
1
2
3
4
