SINCE 1981
9
PLATE AND FrAME - HEAT ExCHANgErS
The following shows typical connections available on the heat exchangers;
Threaded - NPT
Carbon Steel
Studded - ANSI
Carbon Steel
Threaded - NPT
Alloy Nozzle
Studded - ANSI
Alloy Lining
Flanged-
ANSI
Ferrule-
Quick Disconnect
When the heat exchanger has connections on the moveable cover there are special piping
• The moveable cover is not fixed so it’s
nozzles can withstand less loading than the
nozzles on the fixed cover.
• The unit may be subject to re-tightening
during service, therefore when attaching
piping to the moveable cover you must
allow for this difference
(approximately plus or minus 1% of final
tightening dimension).
• The moveable cover goes backward for
servicing. Use elbowed spool pieces for
easy removal.
