FLO-DYNAMICS TSD440, Руководство по эксплуатации

Страница: 15 / 25

Operations Manual
Printed in the U.S.A. for Shift-Rite ®
15
Flo-Dynamics
®
TSD440™ III. Operating Procedures
III. OPERATING PROCEDURES
CAUTION
• Use this equipment only as described in this manual. Use only the manufacturer’s
recommended attachments.
s so that • Care should be taken to arrange the battery cables and service hose they will
ission.
Never pull on the power cables or service hoses to transport the TSD440. Damage may
, or machine may tip over.
e in an attitude other than the normal
The use of any other accessories not specified in this manual may create a hazard.
tions in the front pages of this manual and on
not be tripped over or pulled.
• The TSD440 is fully automatic. Refer to your control panel at all times.
•Flushing high mileage cars that have not been previously serviced can cause operating
roblems in the transm p
•
occur to these components
• Servicing, transporting, or storing this machin
operating position can result in fluid spillage and/or component damage.
• Frequently inspect and clean any tools used, and lubricate all non-sealed ratchet
mechanisms with light oil.
•
• Read, understand and follow Safety Instruc
product safety labels.
DANGER
• Vent vehicle’s exhaust away from work area.
Do not breathe exhaust.
follow Safety Instructions in the front pages of this manual and on
•
• Read, understand and
product safety labels.
WARNING
safety goggles and • Wear protective clothing, user and bystander.
• D o
as o
• T m
• D o
• C n before hooking the machine’s battery clips to them. During
ttery cables and service hoses clear of moving parts such as
otherwise, set parking brake and put gear selector in park.
ing engine parts. Hoses can split or burst
o n t operate the TSD440 in the vicinity of open containers of flammable liquids such
gas line.
his achine is equipped to operate on 12-volt DC power only.
o n t smoke, place metal tools on battery or allow a spark or flame in vicinity of battery.
lea battery terminals
cleaning, keep airborne corrosion from eyes, nose and mouth.
• Keep yourself, clothing, ba
fan blades, belts and pulleys.
• Unless instructed
• Do not leave a running vehicle unattended.
• Keep the service hoses away from hot or mov
causing fluid to be expelled.
• Tighten all connections properly. Insufficient or excessive torque can result in fluid
leakage.