manualshive.com logo in svg

FLO-DYNAMICS 98010, Руководство пользователя

Поделиться
Скачать
FLO-DYNAMICS 98010 Скачать руководство пользователя страница 9

Flo-Dynamics

®

 

 TS650M™

 

 

I. Safety Information

 

 

 

  

 

  

 

 

Risk of injury. 

• This equipment should be operated by qualified personnel only. 
• Use this equipment only as described in this manual. 
• 2 people required when lifting heavy objects. 
• Do not operate this machine on an incline of more than 8 degrees. 
• Always unplug the machine from its power source when not in use. 
• Loop the power cord loosely in its proper location when machine is not in use. 
• Do not operate equipment with a damaged battery cables or hoses, or if the equipment 
has been dropped or damaged, until it has been examined by a qualified service 
representative. 
• Care should be taken to arrange the battery cables and service hoses so that they will 
not be tripped over or pulled. 
• Never pull on the power cables or service hoses to transport the TS650M. Damage may 
occur to these components, or machine may tip over.

 

• Keep area of operation clear of unnecessary tools and equipment. Utilize recessed tool 
storage areas on the top of the machine. 
• Never leave the machine running unattended. 
• The TS650M is not designed for any other purpose than the exchanging of automatic 
transmission fluid. 
Operation of your TS650M unit by anyone other than qualified personnel may result in injury. 

 
 

 

Risk of equipment damage. 

• Flushing high mileage cars that have not been previously serviced can cause operating 
problems in the transmission.

 

• Connect battery cables to a 12-volt power source only (i.e. vehicle’s battery). 
• Servicing, transporting, or storing this machine in an attitude other than the normal 
operating position can result in fluid spillage and/or component damage. 
• Use only the manufacturer’s recommended attachments. 
• The Flo-Dynamics TS650M is fully automatic.  Refer to your control panel at all times. 
• Never pull on the power cables or service hoses to transport the TS650M. Damage may 
occur to these components, or machine may tip over. 
• Periodically clean the machine by wiping down with a clean, soft, dry cloth.

 

Improper operation of equipment may result in damage to machine or components. 

 
 
 

SAVE AND FOLLOW THESE INSTRUCTIONS! 

 

 

 

Operations Manual

 

Printed in the U.S.A. for Flo-Dynamics ®

 

9

 

Содержание 98010


























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды