FLIR Raymarine i70s, Инструкция по установке и эксплуатации

Страница: 27 / 114

4.7 SeaTalk connection
Connections to an existing SeaTalk system must be
made using a SeaTalk to SeaTalk ng® adaptor cable.
Basic SeaTalk system example
12 V dc
D12058-3
9 8
1 0 1 1
1
2 3 4 5
7
6 6
7
1 2
1 Wind vane transducer
2 i60 Wind ( SeaTalk ng® Wind instrument)
3 i50 Depth ( SeaTalk ng® Depth instrument)
4 i50 Depth ( SeaTalk ng® Speed instrument)
5 i70s ( SeaTalk ng® Multifunctional instrument
display)
6 SeaTalk ng® spur cables
7 SeaTalk to SeaTalk ng® adaptor cables
8 Speed transducer
9 Depth transducer
10
SeaTalk Course computer (providing 12 V dc
power to SeaTalk network.)
11
ST6002 ( SeaTalk pilot controller )
12
12 / 24 V dc power supply
SeaTalk power protection
The power supply must be protected by a 5 A fuse
or a circuit breaker providing equivalent protection.
Raymarine recommends that the power is connected
to a SeaTalk system in such a way that the current
drawn on each side of the power connection point
is equal.
4.8 Transducer connections
iTC-5 connection
For details on connecting an iTC-5 to the SeaTalk ng®
backbone and connecting transducers to the iTC-5 ,
refer to the documentation provided with your iTC-5 .
Transducer pod connection
Transducer pods are available for wind, depth
and speed transducers. For detailed installation
instructions, refer to documentation supplied with
your pod.
2 3
D12061-2
1
Item Description
1 Speed and Temperature
transducer
2 Speed pod
3 SeaTalk ng® T-Piece
connector
1. Connect the transducer to the pod, the pod
terminals are color-coded, ensure that each wire
is connected to the corresponding terminal.
2. Connect the pod to the SeaTalk ng® backbone
using a SeaTalk ng® spur cable and T-piece. Pods
must be located no further than 400 mm (15.75
in.) from the connection point on the backbone
Cables and connections 27