FLIR Raymarine CPT-S Transom, Руководство по установке

Страница: 15 / 42

3.3 Required additional components
This product forms part of a system of electronics
and requires the following additional components for
full operation.
• Compatible DownVision ™ Sonar Module or
DownVision ™ variant MFD. Refer to Compatible
products , for a list of compatible products.
• Transducer extension cables. Refer to Chapter 10
Spares and accessories , for suitable cables.
Compatible products
The transducer can be connected directly to the
following
DownVision ™ sonar modules and displays.
Description Part number
CP100 E70204
a68 / a68 Wi-Fi E70206 / E70207
a78 / a78 Wi-Fi E70208 / E70209
a98 E70234
a128 E70237
eS78
E70265
eS98 E70275
eS128 E70285
3.4 Tools required
The following tools are required to install the
transducer.
D12785-1
1
4
6
2
3
5
7
1. Power drill
2. Pozidrive screwdriver
3. 4 mm Hex wrench (Allen key)
4. Marine grade sealant (non-acetate based)
5. Suitable sized drill bit
6. Adhesive tape
7. 24 mm (15/16”) Hole saw (only required if you
are routing the cable through a bulkhead.)
Warning: Marine-grade sealant
Only use non-acetate based marine-grade
sealants. Using an acetate based sealant
can cause damage to plastic parts.
Planning the installation
15