CP-6408-31-I QIG Rev 100
September 2020
This document does not contain any export-controlled inf ormation.
3.4 Connect the Camera
Connectors
Connector
Connection
1
DEFAULT
To reset factory defaults at any time, press the
Default button for at least 20 seconds.
2
LAN
Attach a Cat 5e or Cat 6 cable from the network
switch to the RJ45 connector for a 10/100/1000 Mbps
Ethernet and PoE connection. If using PoE, use a
FLIR CP-POE-4P-60W-xx injector or a switch that
supports Universal PoE 60W 4 pair forced mode. For
more information about compatible injectors and
recommended switches, contact FLIR support. Verify
that the LAN connector LEDs are steady green and
flashing yellow.
3
AC24V IN
If using a 24 VAC power supply, connect it to the
three-pin power terminal block according to the pin
assignment shown.
4
14-pin
terminal
block
Attach wires from external devices to the 14-pin
terminal block connector for alarm and audio in/out
according to the pin assignment shown.
AC24V IN Connector Pin
Definition
1
AC 24L
2
Ground
3
AC 24N
