FLIR DPB34TLX, Инструкция по эксплуатации, Страница: 25 / 36

17
Configuring OSD Menus
TIP: Motion detection settings are usually set independently on the DVR,
which allows for more advanced customization options.
• Motion Det: Select ON to enable motion detection or OFF to disable.
• Detect Sense: Select the motion detection sensitivity level between 0~127.
• Block Disp: Select ON to display blocks in areas where motion is detected
or OFF .
• Detect Area: Press the middle button to configure motion detection areas.
By default the entire area is enabled for detection. Using the movement
arrows you move the 2x2 size block around the screen. Press the middle
button to enable/diable motion detection in the currently selected area. Hold
down the middle button to return to the motion detection menu.
3.9.1 Monitor Area
Allows you to configure up to 4 motion detection areas. Areas will be
highlighted on the screen and flash when motion is detected within them.
Areas will not flash if motion is detected in areas that have been disabled
using DETECT AREA.
When enabled, Monitor Area colors are: 1: Red. 2: Green. 3: Blue. 4: Yellow.