FLIR DPB34TLX, Инструкция по эксплуатации, Страница: 11 / 36

3
Camera Installation
3. Run the cables through the mounting plate. Align the TOP mark on the
camera base with the TOP mark on the mounting plate, rotate the
camera approximately 10° clockwise, and then rotate the camera
counterclockwise to slide the hinge screw into the notch on the mounting
plate. This will allow the camera to hang from the mounting plate while
you connect the cables.
4. Connect the cables and then slide the camera to align the camera base
with the mounting plate. Attach the camera to the mounting plate using
the allen screws (4x).
Mounting plate notch
3
TOP mark on
camera base
TOP mark on
mounting plate
Insert allen
screws
Slide the camera to align the camera
base with the mounting plate
4