FLIR CM-6308-P1-I, Руководство по выпуску прошивки

Страница: 16 / 17

12 CM-6308-P1-I FW v.20190226 Release Notes April 2, 2019
Appendix
A.1. Discovering and Configuring the Camera with DNA
DNA 2.2.1.9 or higher is required for the initial discovery of the camera on networks without a DHCP
server. DNA is also used to access the camera and to change its IP address.
If you have more than one camera, connect them one at a time and change their IP addresses to avoid
potential network conflicts.
To download the DNA and for detailed guidelines about DNA and its usage, refer to the DNA User
Manual , found on the camera product page of the website:
1) Navigate to the FLIR Visible camera page: https://www.flir.com/browse/security/visible-security-
cameras/
2) Click on the camera of choice
3) Click "Go to support page" under the Product name
Example of "Go to support page" link
4) Click on the "Resources" tab
5) Find and download relevant documentation and software