5 Blackfly S Physical Interface
Note:
For optimal video streaming and camera control
performance, we recommend an Intel Pro chipset on a PCIe
interface.
For USB3 cameras—
In order to achieve the maximum benefits of USB3, the camera must connect to a USB3 PCIe 2.0
card. The card must be connected to the PC power supply in order to power the camera through the USB3 interface.
5.7
General Purpose Input/Output (GPIO)
Cased models—
The camera is equipped with a 6-pin GPIO connector on the back of the case. The connector is a Hirose
HR10A-7R-6PB, the mating connector is a Hirose HR10A-7P-6S(73).
Board-level models—
The camera is equipped with a 6-pin GPIO connector. The connector is a JST BM06B-NSHSS-TBT
(LF)(SN), the mating connector is a JST NSHR-06V-S.
2/19/2019
©2015-2019 FLIR
Integrated Imaging
Solutions Inc.
All rights reserved.
FLIR Blackfly
®
S Installation Guide
22