Follow this procedure:
1. Go to
http://support.flir.com
and download FLIR GEV Demo from the downloads
section.
2. Install FLIR GEV Demo.
3. Connect the camera to power and to the computer, typically via a PoE injector con-
nected to the Ethernet cable.
4. Start FLIR GEV Demo.
5. In FLIR GEV Demo, click the
Select/Connect
button.
6. In the GEV Device Selection window, identify the camera using the MAC address
(printed on the camera). Select the camera in the list and click the
OK
button.
7. If the device is not visible, check the box “Show unreachable Network Devices” and
then select the correct device and press "Set IP Address…”. Then assign the correct
IP address to your device.
8. FLIR GEV Demo can now be used to set up and control the camera. Click the
Play
button to start the image stream.
#T559770; r. AL/81723/81723; en-US
10
