FLIR ACCKBD320, Инструкция по эксплуатации

Страница: 22 / 44

Basic Setup
5
10. Enter the ID you set for the device in step 6 and press ENTER .
The keyboard will connect to the device. See 6 Controlling Devices Using
the Keyboard , page 17 for instructions on how to control your device.
5.2.4 Finding RS232 Information on FLIR DVRs or NVRs
On FLIR DVRs and NVRs, the RS232 address is determined by the Device
No in the DVR/NVR settings. On DNR400 Series for example, you can find
the Device No. by right-clicking and then clicking Main Menu>
>General>General . See the example below.
To find the Baud Rate, DataBit, Parity, and StopBit for RS232 on FLIR DVRs
and NVRs, go to the
RS232 menu. On DNR400 Series for example, to get to
the RS232 menu click Main Menu> >General>RS232 . Function
should be set to NetKeyboard. See below example for recommended settings.
#; r. 1.0/21073/21073; en-US 16