FLIR A50 Series, Руководство пользователя

Страница: 29 / 68

Camera web interface 10
• Visual : The camera displays the visual image captured by the visual camera.
• FSX (Flexible Scene Enhancement): The camera displays the thermal image with en-
hanced image details. This image mode is useful when higher contrast is required, for
example when the camera is used in a surveillance application.
To select the image mode, follow this procedure:
1. On the toolbar and in the Data presentation modes section, click Image mode .
2. Select one of the available image modes.
10.4.5 Colorizing the image
The camera can colorize the image in different ways. You can select different color pa-
lettes or apply color alarms (isotherms).
10.4.5.1 Palette
You can change the palette that the software uses to display the different temperatures
within an image. A different palette can make it easier to analyze the image. The most
suitable palette for a certain application depends on many different factors, such as the
target temperature and emissivity, the ambient temperature, and the distance to the tar-
get. You will need to test different palettes in order to find the one that best suits your
application.
To change the palette, follow this procedure:
1. On the toolbar and in the Data presentation modes , click Palette .
2. Select one of the available palettes.
10.4.5.2 Isotherms
By using color alarms (isotherms), anomalies can easily be discovered in an infrared im-
age. The isotherm command applies a contrasting color to all pixels with a temperature
above, below, or between the set temperature levels.
The camera supports the following isotherms:
• Above
Applies a contrasting color (red) to all pixels with a temperature above the specified
temperature level.
#T810579; r. AB/78918/78918; en-US 25