FLIR A3xx pt series, Руководство пользователя

Страница: 24 / 166

Installation 7
Figure 7.7 Dip switch locations in the FLIR A3xx pt series camera.
Pelco Address: This is the address of the system when configured as a Pelco device. The
available range of values is from decimal 0 to 255.
Table 7.1 Dip switch address/ID settings—SW102
ID Bit 1 Bit 2 Bit 3 Bit 4 Bit 5 Bit 6 Bit 7 Bit 8
0
OFF OFF OFF OFF OFF OFF OFF OFF
1 ON OFF OFF OFF OFF OFF OFF OFF
2
OFF ON OFF OFF OFF OFF OFF OFF
3 ON ON OFF OFF OFF OFF OFF OFF
... ... ... ... ... ... ... ... ...
255 ON ON ON ON ON ON ON ON
Other serial communication parameters: The tables below defines the switch locations, bit
numbering, and on/off settings.
Table 7.2 Dip switch address/ID settings—SW103
Settings Descrip-
tion
Baud rate : This is the baud rate of the system user serial
port. The available values are 2400, 4800, 9600, 19200
kbaud.
Bit 1 Bit 2
OFF OFF
2400
ON OFF 4800
OFF ON
9600
ON ON 19200
Camera control protocol : This is the communication pro-
tocol selected for the system when operating over the seri-
al port. The available protocols are Pelco-D and Bosch.
Bit 3 Bit 4
OFF OFF Pelco-D
ON OFF N/A
OFF ON
Bosch
ON ON N/A
Serial communication protocol : This determines the
electrical interface selected for the user serial port. The
available settings are RS-422 and RS-232.
Bit 5 Bit 6
OFF OFF N/A
ON OFF RS-422
OFF ON RS-232
ON ON N/A
#T559795; r.21371/22369; en-US
16