FLIR A3xx pt series, Руководство пользователя

Страница: 20 / 166

Installation 7
Figure 7.3 FLIR A3xx pt series camera mounting (mm)
Connect and operate the camera as a bench test at ground level prior to mounting the
camera in its final location.
Use a thread-locking compound such as Loctite 242 or an equivalent with all metal-to-met-
al threaded connections.
Using the template supplied with the camera as a guide, mark the location of the holes for
mounting the camera. If the template is printed, ensure that it is printed to scale so that the
dimensions are correct.
Once the holes are drilled in the mounting surface, install four (4) 5/16″ or M8 bolts
through the base of the camera.
7.5 Prior to cutting/drilling holes
When selecting a mounting location for the FLIR A3xx pt series camera, consider cable
lengths and cable routing. Ensure that the cables are long enough given the proposed
mounting locations and cable routing requirements.
Use cables that have sufficient dimensions to ensure safety (for power cables) and ad-
equate signal strength (for video and communications).
#T559795; r.21371/22369; en-US
12