FlipStart E-1001S, Руководство пользователя

Страница: 80 / 98

.
Solving problems 74
Suggested troubleshooting steps:
 Check to see if your Bluetooth device is in “discovery” mode. The procedure for making
a device discoverable is different for different devices; a mobile phone might require that
you select an option from a menu, while a keyboard or mouse might only require that
you press a button.
 If you made your device discoverable earlier, check to make sure that it is still in
“discovery” mode. Some devices (such as some mobile phones) only enable discovery
for a limited amount of time.
Problem : My Bluetooth connection is very slow in responding or the connection between the
devices keeps dropping out intermittently or is not working at all.
Suggested troubleshooting steps:
 Make sure the two devices are still paired.
 Check that the external device is in range of the FlipStart. Some connection problems
can be caused by the Bluetooth devices being too far away from each other. Refer to
your device’s user manual for recommended operating distances.
 Check that Windows is configured to accept incoming Bluetooth connections (for more
information, see Windows help).
 Check that there are no other Bluetooth devices in the area either trying to connect to
the FlipStart or actively using it. If there are, wait until the other Bluetooth devices have
finished using the device you want to use, or disable your Bluetooth device from being
“discovered” by other Bluetooth devices.
 Check that there are no other devices in the area using the same radio frequency (2.4
GHz) as Bluetooth. Some devices that might cause radio interference include microwave
ovens, Wi-Fi enabled computers or access points, and some cordless telephones. If this
might be the problem, try moving your FlipStart and Bluetooth device out of the range
of the potentially interfering device.
If all else fails, try removing the device and then adding it again using the steps outlined in
Using Bluetooth devices (on page 63).
What to do if you can't print
Problem: I cannot print to a printer connected to my FlipStart.
Suggested troubleshooting steps:
 Make sure the printer is turned on, has paper, and is ready to print.
 Verify the printer driver has been installed on your FlipStart. For more information, see
your printer's setup instructions.
 Check the cable connecting your FlipStart to your printer.