FRD-57 Remote Display LED, Technical Manual
Rev.2.1, October 2018
Page 3 of 8
2 Introduction
The Remote Display Type FRD-57 in the wall housing can be used in many weighing applications,
where good readability is required.
The following Flintec devices are supported:
-
FT-1x, FT-10 und FT-11x
-
FT-0x
-
DAD72.1, DAD141.1
The remote display is characterized by low power consumption.
The device has very bright LEDs and wide reading angel, the 6 digits display is 57mm.
The communication can be chosen via serial port: RS232, RS485 or 20mA current loop.
The remote display is designed in a stainless-steel housing, IP65.
3 Specifications
Display
Display
6 digits, red LED-7-segments, 57 mm
Point
adjustable, between every digit
Polarity
minus sign
Memory
serial EEPROM
Communication
Serial Port
RS232, RS485, or 20mA current loop
Baud rate adjustable with DIP-switches: 1200, 2400, 9600, 19600 baud
Data Bits adjustable with DIP-switches
Power Supply
230 VAC; +/-
20%; 50…60Hz
Power Consumption
max. 7W
Environment
Operation Temperature
-
20°C…+50°C
Storage Temperature
-
10°C…+70°C
Humidity
90% RH max, non-condensing
Enclosure
Material
Stainless steel
Protection Class
IP65
Dimensions:
365 x 130 x 75