can supply sufficient power for the device
How to use:
1. Connect and use your original factory appliance USB charge cable only and connect it with
one of the 2 USB ports dedicated for Apple and/or Android.
2. Connect the USB Wall Charger to your power mains power socket outlet. It will auto detect
the PD or QC3.0/2.0 charging when your device supports it and voltage/power will be auto
configured. Please see note below.
3. The charging will start
4. Disconnect all cables and adapter and/or mains after use and/or when fully charged
ADD NEW PICTURE HERE FROM USB PORTS
Function Description
USB TOP: TYPE-C PD
USB BOTTOM: TYPE-A QC3.0
Note:
For any device NOT supporting the PD Power Delivery or Qualcomm 3.0/2.0 specification,
the output of the charger will be set to normal charging speed.
• If the connection is not 100% OK, the message “slow charging” could appear. If so, disconnect
briefly for 5 seconds and reconnect the device.
• As there are more and more new devices coming with PD or QC3.0/2.0 and it’s dedicated
firmware’s it can happen that this function is not fully supported at this time.