PNP
Assembly Instructions
Fuselage Assembly
�--
}
·
_......
step8
�;----
_
_
!!!
_
!!!
_
!!!
_
!!!
_
!!!
_
!!!
_
O
�
..._
__J
Steering pushrod
!"!
"""'�
(710mm)
stepO
Elevator push
;s:
step@
1. Before assembly, remove the battery compartment and the fuselage pushrods in the plastic
tube. Install the ball-head buckle on the pushrods. Then insert the rudder push rod from tail
fuselage section into the front fuselage plastic tube.
2. Insert the elevator push rod from tail fuselage section to the front fuselage plastic tube.
3. Use the included epoxy glue to attach the front and rear fuselage. During the gluing process,
take special care to ensure that NO GLUE enters the plastic control rod tube! If any glue does
enter the tubing it will inhibit the control rods ability to function, therefore impeding the aircraft's
ability to fly. Proper execution of the build is the responsibility of the builder, Any such damage is
not covered by the manufacturer or vendor warranty.
4. Use the included epoxy glue to attach the foam parts A and B to the fuselage.
1.Use a servo tester or radio to center the servo.
2.Use screws to attach the servo to the plastic
board.
3.
R
un the servo cable from the plastic board to
the battery compartment.
Note:
If you choose not to use the factory servo,
the servo you choose may be larger. If that's the
case, you need to remove the fixed wooden
platform and glue the servo to the servo position in
the fuselage.
Elevator/Rudder push rod Installati
o
n
A-
Screw
(PWA3x8 4pcs)
B-17g servo
C-Servo mount
!iPITFIRE MK.IXc
lten No.: FLW303
1.
Install the left and right horizontal stabilizers to the fuselage tail.
2.
Turn the fuselage over and use the 4 screws to secure the horizontal stabilizers
Note
:
EPO glue is included with
the kit. Spread the glue evenly
and wait 90 seconds before
installation.
1.
Insert one side of elevator pushrod A through plastic tube B, to servo arm C.
2.
Snap the ball head buckle of the elevator pushrod to the ball on the rudder horn, D.
Horizontal Stabilizer Assembly
Содержание SPITFIRE MK.IXC
Страница 1: ......