Flightline SPITFIRE MK.IXC, Руководство пользователя, Страница: 11 / 15

PNP Assembly Instructions
N
l•fftifiiiii
According to our test results, the following rates proved to be a good starting point. L ow rates are good for
initial flights or for less experienced pilots. Ad j ust rates to suit your own style.
Aileron(ls Side) Elevator (Is Side) Rudder (The Bottom) Flaps
Low Rate
H1/H2 31 mm/31 mm H1/H2 27mm/27mm H1/H2 28mm/28mm
H1 24mm
D/R Rate : 80% D/R Rate : 75% D/R Rate : 80%
High Rate
H1/H2 38mm/38mm H1/H2 33mm/33mm H1/H2 33mm/33mm
H1 40mm
D/R Rate : 100% D/R Rate : 100% D/R Rate : 100%
&_ Note Before Flight
: 1.Depending on your flight battery and your personal preference for flight stability versus agility,
trim the elevator 2mm up. This can be pre-set by either of the following two ways:
- Use push rod to keep 2mm elevator up.
- Center the elevator, and set the 2mm elevator up in your radio.
2.When the flaps are deployed, the aircraft will nose slightly downward. In your radio transmitter,
program a Down-Flap-to-Up-Elevator mix according to these parameters.
- Flap travel down 24mm/ set elevator travel UP 1.5mm
- Flap travel down 40mm/ set elevator travel UP 3mm
!iPITFIRE MK.IXc
lten No.: FLW303