Rev:
G
Revision Date:
10/31/2014
Page 5 of 18
MAN
– FD141CV
Specifications
Display Type
14.1” WXGA High Bright TFT-LCD
Display Color
262,000 Colors
Screen Resolution
1280 x 800 pixels
Brightness
1000 cd/m
2
Dimensions
13.40”(W) x 9.93”(H)x1.50”(D)
Display Size
11.88”(W) x 7.40”(H)
Weight
6.0 lbs
Power
28V DC @ 1.0A
PC&Video Input
VGA, Composite, S-Video
Video Type Supported
NTSC/PAL
Screen Control
On-Screen Display Menu
Materials
Aluminum
DO-160 Testing
Section 21, Category B
Section 7, Category B
Remote Control
IR, included
Pixel Pitch
0.237 mm x 0.237 mm
Operating Temperature
-30
°
C to +80
°
C
Storage Temperature
-40
°
C to +90
°
C
Installation Instructions
All cabin entertainment equipment, such as the FD141CV, should be installed on a non-
essential bus and have a dedicated circuit breaker. It is a requirement that a switch be
installed in the cockpit so that the pilot can de-energize the entertainment system should it
become necessary.
There are fourteen #8-32 mounting holes located on the sides, back and bottom of the
display. Four holes are located at the four corners of the back, six holes are located three
on each side of the bezel and four holes are located on the bottom of the bezel. It is
sufficient to mount the display by four attach points.
Mounting against the bulkhead or on a bracket:
The unit can be mounted internal,
external, or partially internal to the bulkhead. It is recommended that you leave about ¼
inch of space around the rear, top and bottom of the display for the exhaust fan to have
circulating air. When mounting from inside the bulkhead it is possible to have only the
LCD visible to the cabin. The unit will power on automatically upon power application and if
using an external video source selection box the IR is not needed. If you are using the IR
to change the video source selection then you need to have the IR LED visible to the
cabin.
