Document Number:
MAN – DAPS440-SW
Rev:
D
Revision Date:
09/14/2010
Page 6 of 15
Switch
The new DAPS440-SW works with an off the shelf low-cost, no lead time Eaton 4 position
micro switch (Eaton P/N 58210220) or Staco switch (P/N 982431). Each time the switch is
activated it cycles and displays the current equipment source (Example shown below:
“MAP, DVD1, DVD2, CAM”). The Eaton switch uses 28 volt lamps, and the Staco switch
uses LEDs.
The DAPPS440-SW will support the installation of four independent switches at four
different seat locations. Each time the switch is activated, it will illuminate the current
source selected.
The switch illustrated above is from Eaton. Eaton and Staco switches can be ordered from
Dallas Avionics (800-527-2581) and can be customized to the customer’s requirements.
Lead time is one week for customization. The DAPPS440-SW does not include the Eaton
or Staco switch.
All manuals and user guides at all-guides.com
all-guides.com
