6. Setting tolerances
5. Viewing data after removing the
computer from the bracket mount
The data can still be viewed even when the computer has been removed
from the handlebar bracket.
CLK
rpm
VEL
MAX
AVE
STW
DST, STW
AVE, STW
MAX, STW
CNT
TIM
DST
ODO
STW
changes in order
when switch B is
pressed
changes in order when switch A is pressed
mode1
mode2
VEL
• • • • • • • • • • • • • • • • • • • • • • • • •
±1%
DST, ODO
• • • • • • • • • • • • • •
0.05%
CLK
• • • • • • • • • • • • • • • • • • • • •
30ppm
STW, TIM
• • • • • • • • • • • • • • •
50ppm
(5minutes or less per month)
4. Changing the setting data and
the bicycle number
• Refer to “8. Data input”.
• To change the time setting, change the sub-display to show the CLK
display, and then press switch “B” for 5 seconds or more and then enter
the new time setting.
• This function lets you reset input data without losing any data that has
been recorded up to that point (such as total distance and trip distance).
Normal display
Changing tire circumference
Changing no. of F-R gear teeth
Changing type of rear derailleur
Switch “B” 5 seconds
Switch “B” 2 seconds
Switch “B” 2 seconds
Switch “B”
Tire circumference
setting mode is
displayed.
Switch “B” 2 seconds
Switch “A” The bicycle number
to be changed is
displayed.
Display other than
CLK display
Bicycle number is
displayed
Changing the
setting data
Changing the
bicycle number
