(7) Cadence (rpm)
Cadence is calculated from the F - R
gear tooth numbers and current
speed.
Note;
Cadence always appears during
bicycle movement regardless if the
crankarms are rotating.
(10) Digital number of gear teeth (F- R)
Gear combinations are displayed when a shift has
been made. This will show for approx 2 seconds
then original screen will return.
(11) Low battery display (LO BAT)
This flashes when the remaining battery
power is low. The battery should be replaced
with a new one as soon as possible.
(9) Lap counter (CNT)
This function is used to count laps,
etc. (range 0 - 99)
Lap counter is activated by
pressing the ST/SP button.
To reset the counter to zero, press
mode and ST/SP button
simultaneously.
(8) Main display cadence (VEL)
Cadence (rpm) can also be shown
in main display. Current speed will
move to sub - display.
Cadence on main display
Current speed on sub - display
(12) Power saver function
When the computer does not
receive a signal or no button is
pressed during a 30-minute period,
the unit will change to power
saver function, and only the clock
will appear on the display.
Canceling power save mode
The normal display will return as
soon as switch “A” or switch “B”
is pressed.
Note;
During the stopwatch function the
stopwatch will continue to operate
even when the power saver
function has been activated. The
stopwatch will stop automatically
after 90minutes have passed.
Bicycle number
display
Switch “A” or switch “B”
No. of gear teeth
display
Display mode