PAGE 8 — CA4HC WALK-BEHIND TROWEL • OPERATION MANUAL — REV. #1 (06/24/20)
SAFETY INFORMATION
SAFETY DECALS
Decals associated with the safe operation of this equipment
are defi ned below:
DANGER
Belt Guard Hazard
DO NOT
remove belt guards.
Keep hands and fingers clear from engine belts.
Moving parts can crush.
DANGER
Training
This machine to be operated by qualified
personnel only. Ask for training as needed.
DANGER
Rotating Blade Hazard
Keep hands, fingers, and feet clear of engine
fan blades and guard rings. Moving parts can cut.
DO NOT
remove guards.
Stop engine before servicing.
P/N 23700
WARNING
Lifting/Crush Hazard
NEVER
allow any person to stand
underneath the trowel while lifting.
DO NOT
lift trowel with pans attached.
ALWAYS
make sure handle is securely attached.
P/N 36099
NOTICE
Read Manual
To avoid injury, you must read and understand
the operator’s manual before using this machine.
NOTICE
Protective Clothing
ALWAYS
wear appropriate clothing
when operating the trowel.
NOISE LEVEL
Indicates value of the sound power of the
equipment measured at operator’s seat.
WARNING
CANCER &
REPRODUCTIVE HARM
www.P65Warnings.ca.gov
P/N 38707
WARNING
Cancer and Reproductive Harm
This equipment may contain or produce
chemicals and substances known to cause
cancer, birth defects and other reproductive harm.
ALWAYS
work in a well-ventilated area and
ALWAYS
wear approved safety equipment.
GENERAL SAFETY
CAUTION
DO NOT
operate this equipment without proper protective
clothing, shatterproof glasses, respiratory protection,
hearing protection, steel-toed boots and other protective
devices required by the job or city and state regulations.
Avoid wearing jewelry or loose-fi tting clothes that may
snag on the controls or moving parts as this can cause
serious injury.
DO NOT
operate this equipment when not
feeling well due to fatigue, illness, or when
on medication.
DO NOT
operate this equipment under the
infl uence of drugs or alcohol.
ALWAYS
clear the work area of any debris, tools, etc.
that would constitute a hazard while the equipment is
in operation.
NO ONE
other than the operator is to be in the working
area while the equipment is in operation.
NEVER
use the equipment for any purpose other than
its intended purposes or applications.
