Flextool MQ WHITEMAN CA4HC Скачать руководство пользователя страница 11

PAGE 10 — CA4HC WALK-BEHIND TROWEL • OPERATION MANUAL — REV. #1 (06/24/20)

SAFETY INFORMATION

  CAUTION

 

„

DO NOT 

stand on the trowel during operation.

 

„

NEVER 

lubricate components or attempt service on a 

running machine.

 

„

DO NOT

 place your feet or hands inside the guard rings 

while starting or operating this equipment.

 

„

ALWAYS

 keep the work area clear around the trowel. 

Make sure it is free of debris and objects.

  NOTICE

 

„

ALWAYS

 keep the trowel in proper running condition.

 

„

Fix damage to the trowel and replace any broken parts 

immediately.

 

„

ALWAYS

 store equipment properly when it is not being 

used. Equipment should be stored in a clean, dry location 

out of the reach of children and unauthorized personnel.

 

„

A safety manual for operating and maintenance 

personnel of concrete power trowels produced by the 

Association of Equipment Manufacturers (AEM) can be 

obtained for a fee by ordering through their website at 

www.aem.org. Order Form PT-160.

KE

EP CLEAR

ENGINE SAFETY

  WARNING

 

„

DO NOT 

place hands or fingers inside the engine 

compartment while the engine is running.

 

„

DO NOT

 operate the engine with heat shields or 

guards removed.

 

„

Keep fi ngers, hands, hair and clothing away 

from all moving parts to prevent injury.

 

„

DO NOT

 remove the engine oil drain plug 

while the engine is hot. Allow the oil to cool before 

performing maintenance. This will prevent scalding 

of personnel.

  CAUTION

 

„

NEVER

 touch the hot exhaust manifold, 

muffl er, or cylinder. Allow these parts to cool 

before servicing the equipment.

  NOTICE

 

„

DO NOT

 run the engine without an air fi lter or with a dirty 

air fi lter. Severe engine damage may occur. Service the 

air fi lter frequently to prevent engine malfunction.

 

„

NEVER

 tamper with the factory settings 

of the engine or engine governor. Damage 

to the engine or equipment can result 

if operating in speed ranges above the 

maximum allowable.

Содержание MQ WHITEMAN CA4HC















































Отзывы: