FlexTech Topspeed, Руководство пользователя

Страница: 17 / 28

17
FlexTech Topspeed
– USER’S GUIDE
Spark Plug
Clean electrode from fouling by means of a wire brush .
Set sparking distance to 0 .6 – 0 .7 mm by means of a feeler
gauge .
Spark plug type: (NGK) C7HSA
Fuel
Regular or premium unleaded gasoline from 90 octane on-
wards .
Gasoline must be refuelled, if the needle is in the red area
of the fuel display .
Do not overload tank .
In case of longer downtimes, it should be noted that the
tank has completely been refuelled, since corrosion dam-
ages could arise . These damages are excluded by the guar-
antee .
Gasoline Consumption
The consumption specified of approximately 2,8 - 3,3 liters
per 100 km can deviate upwards according to area of opera-
tion, way of driving, maintenance and additional load and
has to be understood as an optimal value .
Engine Oil Check
1) Unscrew oil cap with fuel level plunger on the right
scooter side .
2) Remove oil from fuel level plunger with a clean rag .
3) Place on (not screw in) oil cap with fuel level plunger .
4) Take out vertically oil cap with fuel level plunger .
5) Check oil-level (see figure below) .
6) Screw in again oil cap with fuel level plunger .
max .
min .