FlexTech Topspeed, Руководство пользователя

Страница: 13 / 28

13
FlexTech Topspeed
– USER’S GUIDE
Starting the Engine
Starting with Electric Starter
1 . Check fuel and engine oil level
2 . Put vehicle on main stand
3 . Lateral stand must be upward tilted,
when you start the engine
4 . Set ignition key to ON
5 . Pull rear-wheel brake
6 . Starting: press starter button
ATTENTION:
• When starting, always activate the rear-wheel brake,
since otherwise the vehicle can move.
• Activate the start button for 5 seconds as a maximum.
• Wait for 10 seconds between each activation of the start
button, since otherwise the starter engine and the bat-
tery may be damaged.
• Release the start button, as soon as the engine is run-
ning.
• Never activate the start button, when the engine is run-
ning.
• When the engine is cold, let it heat up in the idling posi-
tion for about 3 minutes.
• Only start engine at places ventilated well, since CO2
emissions are unhealthy.
Starting with Kick Starter
1 . Check fuel and engine oil level
2 . Put vehicle on main stand
3 . Lateral stand must be upward tilted,
when you start the engine
4 . Set ignition key to ON
5 . Upward tilt kick starter lever
6 . Strongly step on kick starter .
Repeat process, until the engine is running .
NOTE: Before you release the rear-wheel brake, the gas handle must be in the zero position (idling).