A group of up to 80 Vivosun LED fixtures can be connected to both the main RJ11 port
and the auxiliary RJ11 port of the controller.
CONNECTING UP TO 160 LED FIXTURES
Switch the rotary knob on all flexstar LED Fixtures to "EXT" [external control].
Plug the RJ11 end of one of the provided controller cables into the RJ11 main port of
the controller.
If a two room setup is used or if more than 80 LED fixtures have to be connected, plug
a second controller cable in the RJ11 aux port.
Plug the RJ11 end of the controller cable[s] into the input of a RJ11 splitter. Use an
interconnect cable to connect one output of the RJ11 splitter to the RJ11 port of the
LED fixture.
Use an interconnect cable to connect one output of the RJ11 splitter to the input of
the following RJ11 splitter.
Repeat this process to connect up to 80 LED fixtures per group.
80
80
80
80
INSTALLATION
1. Use rope hanger to pass through the
hook of the LED, and then fix the other
end of rope hanger on the ceiling of the
greenhouse.
2.Take off the LED hook, then put the
hookon the bracket, and then install the
LED.
2
3. The hook can be rotated 90 degrees.
1
90°
3
2
