FlexRadio Systems Power Genius XL Скачать руководство пользователя страница 4

If you have any questions due to misunderstanding, translation errors and alike, please 
contact the appropriate party for further information.

Radio frequency energy (RF) from transmitters can interact with some electronic devices, 
such as cardiac peacemakers and defibrillators.. Please refer to the implanted peacemaker or
defibrillator manufacturer's instructions with respect to precautions to be taken in the vicinity 
of a radio amateur transmitter. If any interaction or interference with a peacemaker or 
implanted defibrillator is suspected, 

STOP 

transmitting immediately.

! - WARNING!

▲- Caution

i – Information

! – This unit is NOT A TOY. It must not be handled by children nor placed/operated 
within reach of children.

! – Do not leave packing material for this unit unattended. It may be harmful to children 
if misused.

! – This unit contains small parts that could be a choking hazard to small children. Do 
not leave accessories unattended. 

! – Do not operate this unit in potentially explosive environments.

! – Never attempt to insert wires or any tools into the interior of this unit during 
operation. This may cause fire or electric shock.

! – This unit must only be operated with the electrical power described in the User 
Manual. Doing otherwise may cause a fire, injury or electrical shock.

! – Never connect or disconnect antennas while in TRANSMIT mode. This may cause 
electrical shock or RF burns to your skin and damage to the unit.

! – This unit generates Radio Frequency (RF) energy. Use caution and observe proper 
safety practices regarding your system configuration. When attached to an antenna, 
this amplifier is capable of generating RF electromagnetic field which require 
evaluation according to your national law to provide any necessary isolation or 

 Index

4/23

Содержание Power Genius XL
























Отзывы: