1-64ch Video Audio Data Optical
Transmitter Receiver user manual
Page 14
FlexOptic
http://www.flexopticnetworks.com
Solution: Check the video source output, change the
video channel, make sure the corresponding channel’s video
LED is displaying Green.
6.3.3. Problem: Video receiver’s video LED isn’t ON.
Reason: No video signal is detected by the receiver.
Solution: Check the transmitter’s video LED is displaying
green, if not refer to previous item, or check the fiber
connection.
6.3.4. Problem: Status LED isn’t ON.
Reason: Video transmitter fails to operate correctly
Solution: Check the PWR LED to make sure power
supply is ok, otherwise contact with us for help
6.3.5. Problem: Data channel can’t work.
Reason: Data source or data receiver device may have
problem. Data cable connection may have problem.
Data mode Configuration is error. For example, one side
sets to RS232, and other side sets to RS485.
Solution: Check data source and data receiver to make
sure they can work without connecting to our device.
6.3.6. Problem: Audio channel can’t work
Reason: Audio source or audio speaker may have
problem, Audio cable connection may have problem.
Solution: Check the audio source and speaker to make
sure they can work without our device. Check audio converter
cable wire usage with table2.
