Model HC170. Issue Number 8. Date 17.01.2022.
6
Basic Specification
Product Description
This Flexmort CuddleBlanket is a closed circuit recirculation unit designed for continuous operation
and is used to cool bodies using a ‘closed loop’ cooling system through a cooling pad and hose.
Specification
Fluid: Use only Flexmort Ltd Coldflow2 cooling fluid. A data sheet is available upon request.
Note: Internal damage will occur if any other fluid is used (including water).
Electrical Supply
Mains Supply: 230Va/50Hz or 115Vac/60Hz
Total system AC current load:
230Vac - 3.7A (typical) maximum current 5A
115Vac
–
7.0A (typical) maximum current 8A
Physical
(all measurements are approximate)
Overall chiller unit dimensions: 365mm x 249mm x 349mm
Cooling pad dimensions: 100cm x 70cm
Weight: 11kg (drained)
Unpacking and Positioning
Unpacking the CuddleBlanket
Before unpacking the CuddleBlanket unit, inspect the blue packing case for any signs of damage.
Carefully remove unit from packing case. Check unit for signs of transit damage.
If transit damage is discovered, immediately inform both the delivering haulage company and
Flexmort in writing. Take photographic evidence and retain all packaging materials.
Please observe all local and governing recycling requirements when disposing of packaging materials.
Positioning the Equipment
•
The equipment must only be positioned indoors.
•
The CuddleBlanket chiller unit must be kept upright at all times.
•
The equipment must be positioned on a level surface.
