Flexlock M1018, Руководство пользователя

Страница: 8 / 44

8 English
Programming
Ready to use
7 Programming
When programming, you need a programming card, service card and Mode-card or user card
depending on what function you desire.
When changing between modes you always have to change via Mode 1. Reset the lock
to default mode according to 7.2. (E.g. Mode 3 -> Mode 2 needs to be:
Mode 3 -> Mode 1 -> Mode 2.)
7.1 Programming from Mode 1 (default setting) to Mode 2, 3, 4 or 5
1. Place the programming card on the lock for about 3 seconds,
then remove it. You will now hear the programming signal.
2. Place the selected Mode card on the lock within 7 seconds
until you hear a double confirmation signal.
In Mode 1 and 2 you also have to add user cards to
the lock. See under 7.4.
7.2 Reset the lock to Mode 1 (and erase all users in Mode 1 and 2)
1. Hold the programming card on the lock for about
10 seconds. A reset signal is heard.
All users have been erased and the lock is now in Mode 1.
7.3 Programming Ready to use (for locks in Mode 1 or 2)
1. Place the programming card on the lock for about 3 seconds,
then remove it. You will now hear the programming signal.
2. Place the Ready to use card on the lock within 7 seconds until
you hear a double confirmation signal. The lock is
ready for a new unique user that will be added to the lock.
!
!
Programming
Mode
Programming
7 SEC
7 SEC
7 SEC
7.1
7.2
7.3