21
GATEWAY SPECIFICATION - WebdynPulse
WebdynPulse – Gateway specification - Version 2.0
FTP server:
To enable the gateway to communicate with a remote FTP server (via Ethernet OR modem),
enter the following information:
•
Server
: IP Address or symbolic name of the remote FTP server.
•
Login
: User ID used by the gateway for connection to the remote FTP server.
•
Password
: Password used by the gateway for connection to the remote FTP server.
•
Port
: Port number used for communications with the remote FTP server (default: 21).
•
Setup
: Name of the Configuration directory (default:
/CONFIG
).
•
Definition
: Name of the Definition directory (default:
/DEF
).
•
Data
: Name of the Data directory (default:
/DATA
).
•
Alarms
: Name of the Alarms directory (default:
/ALARM
).
•
Commands
: Name of the Commands directory (default:
/CMD
).
•
Log
: Name of the Log directory (default:
/LOG
).
•
Firmware
: Name of the directory for downloading new firmware (default: /BIN).
•
Allow configuration files to be replaced on FTP server:
if this box is checked the local gateway
configuration takes precedence over the remote configuration. In case of local change
configuration files on the remote server will be overwritten.
Check that the FTP directories defined actually exist on the FTP server. The gateway
does not create any directories on the server.
For UNIX servers, the names are case sensitive (lower/UPPER case).
Web Services:
If the gateway has to use a connection to Web Services, enable this option and fill in the URL
of the server.
Otherwise, disable this option.
Once all the parameters have been specified, click on
OK.
A message will appear at the top of the page to indicate that the gateway must be
restarted to take the new parameters into account.
Click on Restart in the menu on the left and confirm this in the dialogue box:
Wait for the WebdynPulse gateway to complete the restart, then reconnect to the built-in Web
server.