webdyn.com
V1.0 subject to changes | Webdyn © by Flexitron Group
55
NOTE
: Default username is admin.
It is strongly recommended that you change the factory default password of the router, which is admin.
All users who try to access the router’s web-based utility or Setup Wizard will be prompted for the router’s
password.
11.3
Management
Configure WEB server parameters.
Protocol: This feature allows you to manage the router using either HTTP protocol or the HTTPS protocol.
Local Web GUI port: Set the access port of the WEB server. For example, when the gateway address is
192.168.1.1 and set the server port 1010, you will enter the address bar in the http://192.168.1.1:1010
to access the WEB configuration page. The default port for the server is 80.
T
elnet: Enable or disable Telnet server.
SSH TCP Forwarding: Enable or disable to support the TCP forwarding.
Password Login: Allows login with the router password (username is admin).
Port: port number for SSHd (default is 22).
Authorized Keys: Here users paste their public keys to enable key-based login (more secure than a simple
password).
Remote Access: This feature allows you to manage the router from a remote location, via the Internet.
To disable this feature, keep the default setting, Disable. To enable this feature, select Enable, and use
the specified port (default is 8080) on your PC to remotely manage the router. You must also change
the router’s default password, if you haven’t . To remotely manage the router, enter http://xxx.xxx.xxx.
xxx:8080 (the x’s represent the router’s Internet IP address, and 8080 represents the specified port) in
web browser’s address field. You will be asked for the router’s password.
