webdyn.com
V1.0 subject to changes | Webdyn © by Flexitron Group
47
10.
Serial and Remote Management
10.1 Serial
There is a console port on the router. Normally, this port is used to debug. This port can also be used for
serial transmission. The router has embedded a serial to TCP program. The data sent to the serial port is
encapsulated by TCP/IP protocol stack and then is sent to the destination server. This function can work
as a IP Modem.
Baudrate: The serial port’s baud rate.
Databit: The serial port’s data bit.
Parity: The serial port’s parity.
Stopbit: The serial port’s stopbit.
Flow Control: The serial port’s flow control type.
Enable Serial TCP Function: Enable the serial to TCP function.
Protocol Type: The protocol type to transmit data.
UDP(DTU): Data transmit with UDP protocol , work as a DTU which has application protocol and hear beat
mechanism.
Pure UDP: Data transmit with standard UDP protocol.
TCP(DTU): Data transmit with TCP protocol , work as a DTU which has application protocol and hear beat
mechanism.
Pure TCP: Data transmit with standard TCP protocol, router is the client.
TCP Server: Data transmit with standard TCP protocol, router is the server.
