Flexit Roomie Dual, Инструкция по сборке и эксплуатации

Страница: 22 / 28

22
R O O M I E D U A L
7. Technical maintenance
!
Disconnect the unit from power supply
before any maintenance operations.
1. Press the latches on the side of the indoor control
unit to take off the front part. Then open the latches
and remove the front part of the front panel. Remove
the filters for cleaning. Reverse the above procedures to
reassemble.
2. Disconnect the socket from the circuit board.
While removing the socket do not pull the wires.
Uplift it with a flat screw driver of a respective size.
Disconnect the socket
from the circuit board.
Do not pull the wires! Use a flat screwdriver
to disconnect the
socket.
UP!
Never remove the control board!
It may cause an alarm!
After completion of the servicing and assembly of the
ventilation unit and re-installation of the socket reset an
alarm following the procedure on page 21.
Maintenance of the ventilator means regular cleaning of the
ventilator surfaces of dust and cleaning and replacement of
the filters.
To access the basic assembly units follow the steps:
Turn off the unit using the remote control or the buttons on
the indoor unit.