Flexit 116001, Инструкция по сборке и эксплуатации

Страница: 18 / 24

18
EQ 2
Unit control with a sensor control panel
Turning the unit on
Press any of speed selection buttons , , or the timer buttons , .
7XUQLQJWKHXQLWR΍
Press the active speed button , , or the active timer button , , if no speed button is
active.
Unit speed selection
Press the inactive speed button , , .
Unit operation mode selec-
tion
Press the inactive REGENERATION or VENTILATION button.
7KHGLUHFWLRQRIDLUȵRZLQWKHXQLWVXSSO\DQGH[WUDFWPRGHLVVHWZKHQFRQQHFWLQJWKHXQLW
according to the external connections wiring diagram.
Turning the timer on
Press the timer button or .
Timer selection
Press the inactive timer button or .
7XUQLQJWKHWLPHUR΍
Press the active timer button or .
If the timer period expires:
The unit continues operation at a set speed. The speed can be selected before switching on the
timer as well as during the timer-based operation.
7KHXQLWWXUQVR΋LIWKHVSHHGZDVQRWVHOHFWHG
$IWHUH[SLU\RIWKHSHULRGVHWIRUWKHȴOWHUWLPHU
IDFWRU\VHWWLQJGD\VWKH)Δ/7(5
contamination indicator starts glowing. In this
FDVHFOHDQRUUHSODFHWKHȴOWHUVDQGUHVHWWKH
ȴOWHUWLPHU
5HVHWWLQJWKHȴOWHUWLPHUDQGWKHRSHUDWLQJ
hours: press and hold the FILTER indicator.
REGENERATION
VENTILATION
The ALARM indicator glows in case of
HPHUJHQF\VWRSRIWKHPRWRUDVDUHVXOWRI
which the unit stops.
Resetting alarm indication: press and hold
the ALARM indicator until the indicators start
EOLQNLQJUDSLGO\
Timer
Speed III
4 hours
Speed III
Speed II
Speed I
Timer
Speed I
8 hours